Skip to main content

Home Appliance Service

Washing Machine Repair at Home

Home repair for front load, top load and semi-automatic washing machines – not spinning, not draining, water leakage, loud noise and error codes.

Technician repairing a front-load washing machine

Washing machine faults often show up as error codes on fully automatic models. Most of them point to a few common areas: the drain pump and filter, the water inlet valve, the door lock on front loaders, the motor and belt, or the control board.

The technician reads the error code, runs a test cycle where possible, and checks the drain filter and hoses first – a coin or hairpin stuck in the pump is a surprisingly common cause of 'not draining' complaints.

Washing Machine problems we repair

Not draining or water left inside

Blocked drain filter or hose, or a failed drain pump. The filter is cleaned and the pump tested.

Drum not spinning

Worn belt, motor carbon brushes, door lock fault (front load) or an unbalanced load.

Water not filling

Low tap pressure, a clogged inlet filter or a failed inlet valve.

Leaking water

Damaged door gasket, loose hoses or a cracked tub seal.

Loud banging during spin

Worn shock absorbers, suspension rods or drum bearings.

Error code on display

The code points to the area at fault. Note it down when booking so the right parts come on the first visit.

Simple care tips

  • • Clean the drain filter (front load) once a month.
  • • Do not overload the drum beyond the rated capacity.
  • • Use the right detergent – front loaders need low-foam detergent.
  • • Leave the door open after use so the gasket can dry and does not smell.

How the visit works

The technician inspects the washing machine, explains the fault in plain language and quotes the cost before starting. Repair or part replacement is done only after you approve, and the appliance is tested before the technician leaves.

Washing Machine repair near you

Frequently asked questions

Why is my washing machine not spinning?

Common causes are an unbalanced load, a worn belt, motor brushes, a door lock fault or a drain problem. The technician checks these in order.

Can you repair front load machines at home?

Yes. Most front load repairs, including drain pump, door lock and gasket replacement, are done at home.

Do you repair semi-automatic washing machines?

Yes, we repair semi-automatic, top load and front load machines.

LED LCD TV CUSTOMER CARE is an independent repair service and is not an authorised service centre of any appliance brand.

Book a Technician

Fill in the details and we will call you back.

WhatsApp Instead

Your information is safe with us. We use it only to respond to your request.

How it works

Simple From Booking to Repair

Four clear steps, from your first message to a tested television.

  1. 01

    Book

    Send your TV type, brand, problem and area through the form, phone or WhatsApp.

  2. 02

    Technician Visits

    We confirm a convenient slot and a technician reaches your address with tools.

  3. 03

    Diagnosis

    The TV is inspected, the actual fault is identified and explained to you.

  4. 04

    Repair

    Repair or part replacement is carried out after your approval, then tested.

Washing Machine Repair FAQs

Yes. Diagnosis and most repairs are handled at your home at a booked time slot.

Is Your TV Not Working?

Tell us what is wrong with your TV and request professional repair service.