Backlight driver instability
An ageing driver or failing capacitor cannot hold steady current, producing pulsing or flicker under load.
TV Problem Guide
TV Screen Flickering
Flicker is one of the more diagnosable television faults because it usually changes with brightness, input or temperature — and those patterns point straight at the cause.
Symptoms you may notice
- Screen flickers at certain brightness levels
- Flicker only on one input or one app
- Flicker that starts after the TV warms up
- Rapid blinking on and off
- Brightness pulsing slowly
Possible causes
Cable and source issues
A poor HDMI cable, loose connector or mismatched refresh rate creates flicker only on the affected input.
Mains voltage fluctuation
Unstable supply in the building shows up as flicker that comes and goes at particular times of day.
Picture settings and energy modes
Ambient light sensors and eco modes adjust brightness automatically, which is easily mistaken for a fault.
What a technician checks
- Flicker behaviour across inputs and built-in apps
- Backlight driver output under measurement
- Supply stability at the socket
- Cable substitution with known-good leads
- Ambient sensor and eco mode state
Safe checks you can do first
- Turn off eco/ambient brightness in the picture menu
- Swap the HDMI cable and try a different port
- Note whether flicker starts cold or after warm-up
How the service works
Book a visit, describe the symptom, and a technician inspects the television at your home. The fault is explained in plain language, the cost is quoted before work starts, and the repair proceeds only after you approve it.
Please do not open the television or work on internal boards yourself. Panels and power supplies can hold a charge even when unplugged, so internal checks should be left to a technician.
Book a TV Technician
Share your details and we will call you back.
How it works
Simple From Booking to Repair
Four clear steps, from your first message to a tested television.
- 01
Book
Send your TV type, brand, problem and area through the form, phone or WhatsApp.
- 02
Technician Visits
We confirm a convenient slot and a technician reaches your address with tools.
- 03
Diagnosis
The TV is inspected, the actual fault is identified and explained to you.
- 04
Repair
Repair or part replacement is carried out after your approval, then tested.
Frequently Asked Questions
Persistent flicker from an unstable supply can shorten component life, so it is worth getting inspected rather than ignoring.
If the cause is mains fluctuation, yes, it often helps. The technician confirms by measuring the supply during the visit.
Occasionally, especially right after a firmware update or when the refresh rate does not match the source.
Book a technician for this problem
Call +91 80808 03018, message us on WhatsApp, or use the booking form above and a technician will get back to you.
Is Your TV Not Working?
Tell us what is wrong with your TV and request professional repair service.